Honeywell Xenon XP 1952g (1952GHD-2) Wireless Barcode Scanner: Specs and Buying Guide
The Honeywell Xenon XP 1952g (1952GHD-2) is the wireless, high-density member of the Xenon XP family - a Bluetooth handheld reading down to 3 mil, working up to 100 metres from its base station, and rated for around 50,000 scans on a charge. The HD in the part number is the point of the product: this is a scanner bought specifically to read very small, very dense codes, without a cable tethering the operator to a terminal. This guide covers the full 1952GHD-2 specification, what high-density optics change in practice, and how to decide between it and the corded 1950g.
What High Density Actually Means
Barcode density is measured in mil - the width of the narrowest bar in thousandths of an inch. Ordinary retail and shipping labels sit around 10 to 13 mil and any modern imager reads them. Entry-level scanners typically bottom out near 5 mil. The 1952GHD-2 reads down to 3 mil, and that gap is where a large number of real-world scanning problems live.
Codes below 5 mil are unavoidable in certain industries. Electronic components carry Data Matrix marks a few millimetres across because there is no room for anything larger. Pharmacy unit-dose packaging, laboratory specimen vials, surgical instruments, jewellery tags and precision-machined parts all use dense marking for the same reason. A standard-density scanner in these environments does not fail cleanly - it just takes two or three attempts per scan, and nobody logs it as a fault.
The trade-off is working distance. High-density optics are optimised for close reading, so the 1952GHD-2 is at its best within short range rather than reaching across a pallet. If you need both fine codes and distance, that is a different scanner class entirely.
1952GHD-2 Full Specifications
| Part Number | 1952GHD-2 |
| Manufacturer | Honeywell |
| Product Family | Xenon XP 1952g |
| Scanner Type | Handheld Wireless Bluetooth |
| Imaging Technology | 2D Area Imaging (N6703 HD) |
| Scan Range | High Density (HD) |
| Minimum Resolution | 3 mil |
| Symbologies | 1D, 2D, PDF417, QR Code, Data Matrix |
| Wireless Standard | Bluetooth Class 2 |
| Wireless Range | Up to 100 metres |
| Battery | Li-Ion, up to 50,000 scans |
| Base Station Connectivity | USB, RS-232 |
| Drop Resistance | 1.8 m to concrete |
| Tumble Specification | 2,000 tumbles at 1 m |
| Weight | 0.48 lbs (scanner only) |
| Condition | New |
| Warranty | 30-day TechSellerUSA warranty |
What the Wireless Design Changes
Scanning where the items are
A corded scanner requires items to come to the terminal. In a pharmacy stockroom, a laboratory, a parts store or a jewellery counter, that means carrying trays of small, fragile or high-value items back and forth. With 100 metres of Bluetooth range the operator takes the scanner to the shelf instead, which removes handling risk as well as walking time.
Batch mode for out-of-range work
When the scanner moves beyond range of its base, batch mode stores scans in memory and uploads them automatically on reconnection. For stock counts in remote storage areas, offsite audits or vehicle checks, this means the workflow does not depend on network or base station coverage at the point of scanning.
A battery that lasts the shift
Around 50,000 scans per charge is comfortably more than a single operator will use in a day, which means no mid-shift charging and no spare-battery process to administer. The base station doubles as the charger, so the scanner charges whenever it is set down.
SKU: 1952GHD-2 | New | High Density optics | 30-day warranty
View Details & Request a Quote →1952g vs 1950g: Which Xenon XP Do You Need?
These two share the same imaging platform and durability rating, and differ on two axes: cable and optics.
The corded Xenon XP 1950g is standard range, cheaper, and has no battery to manage. It is the correct choice for a fixed counter or dispensing station where items arrive at the operator and the scanner never needs to move. Standard-range optics also give it a longer working distance, out to around 42 cm.
The 1952GHD-2 adds Bluetooth and high-density optics. Choose it when operators must move to the stock rather than the reverse, and when the codes involved are genuinely small. Buying wireless when the scanner never leaves the counter adds a battery to manage for no benefit; buying standard range when your codes are 3 mil means fighting every scan.
If your requirement is distance rather than density - reading rack labels several metres away - neither is right, and an extended-range unit such as the Granit XP 1991iXR is the correct answer.
Where the 1952GHD-2 Fits
Pharmacy and hospital dispensing, laboratory sample handling, electronics manufacturing and repair benches, jewellery and watch retail, precision engineering stores, and medical device tracking. In each case the codes are small, the items are handled carefully, and the operator moves around a workspace rather than standing at a single till.
It is not the right scanner for a supermarket checkout, a warehouse floor or a loading dock. The 1.8 m drop rating covers indoor use but the unit is not sealed against dust or water, and high-density optics are wasted on standard shipping labels.
Buying the Xenon XP 1952g from TechSellerUSA
We supply the 1952GHD-2 new with a 30-day warranty, as single units or in volume for multi-site rollouts. Because scan-range optics cannot be changed after purchase, we recommend confirming your smallest code size before ordering - our team can advise whether HD optics are necessary or whether standard range will serve. Browse the full Honeywell scanner range or our complete printers and scanners category.
Frequently Asked Questions
What is the difference between the 1950g and the 1952g?
The 1950g is corded with standard-range optics; the 1952g is Bluetooth wireless and, in this HD configuration, carries high-density optics reading down to 3 mil. Choose the 1952g when operators must move to the stock and the codes are genuinely small.
How far can the 1952GHD-2 work from its base station?
Up to 100 metres over Bluetooth Class 2 in line-of-sight conditions. Real range is shorter through walls and racking, but batch mode stores scans out of range and uploads them automatically when the scanner reconnects.
How long does the battery last?
The Li-Ion battery is rated for up to 50,000 scans per charge, comfortably more than one operator uses in a shift. The base station doubles as the charger, so the scanner charges whenever it is set down.
Do I need high density optics?
Only if your smallest barcodes are below about 5 mil - small Data Matrix marks on electronics, pharmacy unit-dose packaging, laboratory vials, jewellery tags or precision parts. For standard retail and shipping labels, standard-range optics give you more working distance at lower cost.
Can the 1952GHD-2 be used in a warehouse or freezer?
No. It handles a 1.8 m drop and 2,000 tumbles at 1 m for indoor use, but it is not sealed against dust or water. For warehouses, freezers, yards or loading docks, an IP67-rated ultra-rugged scanner is required.
Not sure whether high-density optics are necessary for your codes? Request a quote on the Honeywell Xenon XP 1952g and our team will advise within the hour.
