Honeywell Granit XP 1991iXR Ultra-Rugged Barcode Scanner: Specs and Buying Guide

The Honeywell Granit XP 1991iXR (1991iXR-3USB-5-N) is built for the two hardest conditions in barcode scanning at once: extreme physical abuse and extreme distance. It survives a 3 metre drop onto concrete, carries an IP67 seal, operates from -30°C to 50°C, and reads retro-reflective labels at up to 20 metres. That last figure is the one that changes how a warehouse works - an operator can read a rack label five levels up without leaving the forklift seat. This guide covers the full 1991iXR-3USB-5-N specification, where extended range genuinely pays for itself, and what to verify before ordering.

What Ultra-Rugged Actually Means Here

Most scanner failures in industrial settings are physical rather than electronic. A unit falls from a forklift, gets soaked on a loading dock in the rain, or is carried between a freezer and a warm bay until condensation forms inside the housing. The Granit XP addresses each of these specifically.

The 3 metre drop rating is roughly double what a standard commercial-grade scanner tolerates, and it reflects the reality of a device being dropped from a raised cab rather than from a countertop. IP67 sealing means the housing resists dust ingress completely and survives temporary water immersion, so rain, washdown areas and dusty yards are all within specification.

The -30°C to 50°C operating range is what makes it usable in frozen food storage, cold-chain pharmaceutical warehousing and genuine outdoor winter conditions. Standard scanners in these environments fail in ways that look like intermittent faults: sluggish decoding, condensation on the window, batteries that collapse without warning.

At 1.05 lbs it is noticeably heavier than a retail scanner. That weight is a direct consequence of the sealing and internal shock mounting, and operators wearing gloves generally prefer it - a heavier body is easier to grip securely and harder to fumble.

1991iXR-3USB-5-N Full Specifications

Extended Range: The Specification That Changes Workflow

A 20 metre reading distance is not a marginal improvement over a standard scanner's arm's-length range - it removes an entire step from the job. In a high-bay warehouse, verifying a pallet location on the fourth or fifth rack level normally means bringing the pallet down, or sending someone up. With extended-range optics the operator reads the label from ground level or from the forklift seat, confirms the location, and moves on.

The 20 metre figure applies to retro-reflective labels, which are the high-visibility rack and location labels designed specifically for long-range scanning. Ordinary printed labels read at shorter distances. If you are planning a deployment around long-range scanning, the label specification matters as much as the scanner - retro-reflective location labels and an XR scanner are a matched pair, and one without the other underdelivers.

The second workflow gain is safety. Every occasion an operator does not need to climb racking, lower a pallet or walk into an aisle to read a label is a removed risk, and in operations with formal safety reporting this often carries more weight than the productivity argument.

IN STOCK · NEW

1991iXR-3USB-5-N – Honeywell Granit XP 1991iXR Ultra-Rugged Scanner

SKU: 1991iXR-3USB-5-N  |  New  |  IP67, 3 m drop  |  30-day warranty

View Details & Request a Quote →

Where the Granit XP Fits

High-bay warehousing and racked distribution centres are the primary case, followed by cold storage and cold-chain logistics, outdoor yards and container handling, heavy manufacturing, and building and industrial supply. The common factor is that the scanner is exposed to conditions that destroy ordinary hardware, or that labels sit further away than an operator can reach.

It is the wrong scanner for a retail counter, a pharmacy or a laboratory. It is heavy, expensive relative to the job, and its 5 mil minimum resolution and extended-range optics are optimised for distance rather than fine detail. For small dense codes at close range the Xenon XP 1952g with high-density optics is the correct choice, and for a general indoor counter the corded Xenon XP 1950g costs considerably less.

Cordless in a Rugged Environment

This is a cordless scanner. It talks to its charge and communication base over Class 1 Bluetooth v4.2, which Honeywell rates at up to 100 m (330 ft) line of sight, and the base connects to the host over USB. With no cable there is nothing to snag or sever on racking or a forklift, and the operator can carry the scanner to the label, the same idea as the Zebra DS3678. The trade is battery and base management: Honeywell rates the battery at up to 50,000 scans per charge, and every scanner needs a base with a place to sit and charge.

The rule of thumb: if operators carry the scanner across an aisle or a yard, cordless earns its place. If the scanner never leaves one fixed station and you would rather avoid charging, the corded Granit XP 1990iXR does the same extended range job on a cable.

Buying the Granit XP 1991iXR from Tech Seller USA

We supply the 1991iXR-3USB-5-N new with the interface cable included and a 30-day warranty, as single units or in volume. Because extended-range optics cannot be changed after purchase, confirm your rack heights and label type before ordering - our team can advise whether XR optics plus retro-reflective labels are the right combination for your racking. Browse the full Honeywell scanner range or our complete printers and scanners category.

Frequently Asked Questions

Planning a long-range scanning deployment? Request a quote on the Honeywell Granit XP 1991iXR and our team will help you match optics and label type to your racking.