Zebra ZT510 Industrial Printer: Specs and Buying Guide
The Zebra ZT510 industrial printer is a 4 inch thermal label printer with a metal frame, built for warehouses, distribution centers and production lines that print labels all shift. Zebra positions it as taking the 105SL Plus to a new level with expanded performance and value, which makes it a common choice both for new lines and for replacing older Zebra industrial printers.
We list five ZT510 printers in 203 dpi and 300 dpi, in new and refurbished condition, plus a 203 dpi replacement printhead. This guide covers what the ZT510 is for, who it suits, how the part numbers differ, media and ribbon, setup and command languages, its current status at Zebra, what to check on a refurbished unit, and how it compares with the ZT410, ZT411 and ZT610 in our listing. For recorded values, jump to the ZT510 specs table or the full ZT510 range.
In this guide
- Products in our listing
- Zebra ZT510 specs in our listing
- What the Zebra ZT510 industrial printer is for
- Who the ZT510 suits
- Key configuration choices
- Media and ribbon for the ZT510
- Setup, command languages and compatibility
- ZT510 lifecycle and status
- Buying a refurbished ZT510: what to check
- ZT510 vs ZT411, ZT410 and ZT610 in our listing
- Full ZT510 range in our listing
- Common questions
Products in our listing
Four of our ZT510 printers are shown below; the full range table further down lists every part number.
ZT51043-T210000Z is new; ZT51042-T01000GA, ZT51042-T010000Z, ZT51043-T010000Z and ZT51042-T210000Z are refurbished. Every unit carries the 30-Day Tech Seller USA warranty. Browse the full Zebra printer range or all printers and scanners.
Need one ZT510 or a full line of them?
Send the part numbers and quantities you need and we will confirm each configuration and quote.
Zebra ZT510 specs in our listing
The table below is taken from our product data. ZT51042-T01000GA has its own column because its record is the most detailed; the other four printers share the values in the second column except where the full range table shows a difference.
| Specification | ZT51042-T01000GA | ZT51042-T010000Z, ZT51042-T210000Z, ZT51043-T010000Z, ZT51043-T210000Z |
|---|---|---|
| Condition | Refurbished | ZT51043-T210000Z new, others refurbished |
| Print method | Thermal transfer / direct thermal | Thermal transfer |
| Resolution | 203 dpi | 203 dpi (ZT51042) or 300 dpi (ZT51043) |
| Print speed | 2.4 to 12 ips | Up to 12 in/sec at 203 dpi, up to 10 in/sec at 300 dpi |
| Max print width | 4.09 in (104 mm) | 4.09 inches (104 mm) |
| Media width | 0.79 to 4.5 in (20 to 114 mm) | 0.79 inches to 4.5 inches |
| Memory | 512 MB SDRAM, 2 GB onboard flash | 2GB Flash / 512MB SDRAM |
| Connectivity | USB, Serial, Ethernet, Bluetooth | RS-232 Serial, USB 2.0, Bluetooth Low Energy, Gigabit Ethernet |
| Interface detail | RS-232 serial, USB 2.0, Bluetooth LE, NFC tag, Gigabit Ethernet standard; optional parallel, USB host and 802.11ac wireless print server | Not listed |
| Command languages | Not listed | ZPL, ZPL II |
| Display | Back-lit multi-line graphic LCD with keypad | Not listed |
| Operating temperature | Thermal transfer 40 to 104 F (5 to 40 C); direct thermal 32 to 104 F (0 to 40 C) | Not listed |
| Power | 90 to 265 V AC, 47 to 63 Hz | Not listed |
| Dimensions | 15.58 x 10.56 x 20.17 in (395.7 x 268.2 x 512.3 mm) | Not listed |
| Listed weight | 50 lbs | 50 lbs |
| Warranty | 30-Day Tech Seller USA | 30-Day Tech Seller USA |
What the Zebra ZT510 industrial printer is for
The ZT510 is a workhorse for high duty labels: carton and pallet labels in distribution, shipping labels on outbound lines, product and work in process labels in manufacturing, and compliance labels that must scan first time. Zebra describes durable steel structural components meant to handle extreme temperatures, dust and debris, which is why it is placed on warehouse floors and production lines rather than in offices.
Its role in the Zebra range is clear from how Zebra presents it: a cost effective industrial printer that builds on the 105SL Plus. Many sites run 105SL Plus printers that have been in service for years, and the ZT510 gives them a newer 4 inch printer with similar duty, modern connectivity and current management tools. If you are weighing a ZT510 105SL Plus replacement, our guide to replacing a Zebra 105SL Plus and our ZT410 vs 105SL Plus vs 110Xi4 comparison set out the options.
Who the ZT510 suits
The Zebra ZT510 industrial printer suits operations that print thousands of labels a day on one printer and need it to keep running across shifts: distribution centers, third party logistics sites, food and beverage plants, automotive and electronics production, and any line where a stopped printer stops shipping. Its listed weight of 50 lbs reflects the metal frame and large media capacity, so it belongs on a sturdy stand or table rather than a desk.
It also suits multi-unit buyers. Standardizing a line or a building on ZT510 printers means one set of label formats, one ribbon and media specification per resolution, one printhead part number per resolution and one setup procedure. Mixing new and refurbished units of the same part number is a practical way to cover a large rollout while keeping configurations identical.
For lower daily volumes, a desktop printer or a lighter industrial model may be enough. Our industrial vs desktop label printers guide explains where the line falls.
Key configuration choices
ZT510 203 vs 300 dpi. The ZT51042 part numbers are 203 dpi and the ZT51043 part numbers are 300 dpi in our data. The 203 dpi units are recorded at up to 12 inches per second and the 300 dpi units at up to 10 inches per second, which matches the trade off you would expect: finer detail at a lower top speed. Choose 300 dpi for small text, small 2D codes and dense compliance labels, and 203 dpi for shipping and carton labels where throughput matters more. Our 203 vs 300 vs 600 dpi resolution guide covers this in more depth.
Print method. ZT51042-T01000GA is recorded as thermal transfer and direct thermal. The other four ZT510 printers are recorded as thermal transfer. Zebra lists operating temperatures for both thermal transfer and direct thermal printing on the ZT510, so ask us to confirm the mode on a specific unit if direct thermal matters to you. Our direct thermal vs thermal transfer guide explains which labels need a ribbon.
Connectivity. Every ZT510 in our listing is recorded with serial, USB, Bluetooth Low Energy and Gigabit Ethernet. The record for ZT51042-T01000GA also lists an NFC tag as standard, with parallel, USB host and an 802.11ac wireless print server as options. Zebra lists the dual band Wi-Fi and Bluetooth card as an optional accessory, so do not assume Wi-Fi unless the unit you order has it fitted.
Media handling. Zebra lists rewind, cutter and peeler options for the ZT510. Our product data does not record media handling for these part numbers, and the configuration code in each part number differs, so tell us whether you need tear off, peel, rewind or cut and we will confirm the unit before quoting. Our printer media handling modes guide explains each mode.
Media and ribbon for the ZT510
Our data records a media width of 0.79 to 4.5 inches and a maximum print width of 4.09 inches (104 mm) across the ZT510 range. Zebra lists a maximum media roll of 8.0 inches outer diameter on a 3 inch core, so the printer holds large rolls and needs fewer changes per shift.
For ribbons, Zebra lists a standard ribbon length of 450 m on a 1 inch core, with ribbon widths from 2.00 to 4.33 inches. Long ribbons pair well with large label rolls, so a full roll of labels and a ribbon can often be changed together. Match the ribbon width to the label, and match the ribbon type to the material: wax for paper, wax and resin for coated paper and many synthetics, and resin for polyester and polypropylene labels that face chemicals, heat or abrasion. The label media and ribbon selection guide goes into detail.
Setup, command languages and compatibility
Our data records ZPL and ZPL II for the ZT510, and Zebra also lists XML enabled printing and optional ZBI 2.0. That means label formats written for other ZPL printers, including the 105SL Plus and ZT400 series, usually run on the ZT510 with little or no change. Unlike the ZT410 in our listing, which is recorded with EPL as well, our ZT510 records do not list EPL, so sites still sending EPL should test before switching. Our ZPL vs ESC/POS command languages guide explains the differences between printer languages.
Zebra lists Link-OS on the ZT510 for visibility, remote management and easier maintenance, and the Zebra DNA for Printers platform, Printer Setup Utilities, PrintSecure and Printer Profile Manager Enterprise as supporting tools. Zebra support for the ZT510 points to its Windows printer driver and Zebra Setup Utilities for setup. For fleets, set the configuration once and push it to every unit; our printer firmware and fleet configuration guide covers that approach.
A practical first setup: load media and ribbon, run media calibration, print a configuration label, set the network address, then print your real label formats from your own system at the intended speed and darkness.
ZT510 lifecycle and status
At the time of writing, Zebra still has a ZT510 product page and a ZT510 support page, which describes it as part of the ZT500 Series printer family. Neither page shows a discontinuation notice or names a replacement model. That makes the Zebra ZT510 industrial printer a reasonable choice for buyers who want a current 4 inch Zebra industrial printer, and refurbished units are a cost effective way to add matching printers to an existing ZT510 line.
Lifecycle status can change, so if long term manufacturer support matters to your project, check the Zebra support page for the latest status before a large rollout.
Buying a refurbished ZT510: what to check
Printhead. The Zebra ZT510 printhead is the main wear part. Print a test pattern on arrival and look for white lines through the print. We also list the P1083347-005 203 dpi ZT510 printhead if a 203 dpi head needs replacing later. Our printhead failure diagnosis and replacement guide explains the symptoms.
Platen roller and media path. A worn or glazed platen causes skew, light print and tracking problems that are easily mistaken for head faults. Routine cleaning is covered in our thermal printer maintenance guide.
Configuration. Print a configuration label and confirm resolution, print mode, firmware and installed options match your order, especially any media handling option.
Condition terms. Our refurbished hardware grading guide explains what refurbished means at Tech Seller USA.
ZT510 vs ZT411, ZT410 and ZT610 in our listing
The Zebra ZT410 (ZT41042-T010000Z) is recorded at 203 dpi, up to 14 in/sec, ZPL, ZPL II and EPL, with USB, serial, 10/100 Ethernet and Bluetooth 2.1. It is the older mid range Zebra industrial printer, faster on paper and with EPL support, but with slower wired networking than the ZT510 Gigabit Ethernet.
The Zebra ZT411 (ZT41142-T01000) is recorded at 203 dpi, up to 14 in/sec, thermal transfer and direct thermal, with ZPL, ZPL II, EPL and XML. It is a ZT400 series model and our Zebra ZT411 label printer guide covers it in depth. Choose the ZT411 if you want the higher recorded top speed or EPL; choose the ZT510 if you are moving from a 105SL Plus and want the printer Zebra presents as building on the 105SL Plus.
The Zebra ZT610 (ZT61042-T010100Z) is recorded at 203 dpi, up to 14 in/sec, 2GB Flash and 1GB SDRAM, Gigabit Ethernet, Bluetooth 4.1 and NFC. Zebra presents the ZT6 Series as advancing the legacy of its Xi Series, so it suits the most demanding lines. For the bigger picture across Zebra generations, see our Zebra industrial printer generations guide.
Full ZT510 range in our listing
Every ZT510 part number we list is below, including the replacement printhead. Select a part number to open its product page.
| Part number | Type | Resolution | Print method | Speed | Condition |
|---|---|---|---|---|---|
| ZT51042-T01000GA | Printer | 203 dpi | Thermal transfer / direct thermal | 2.4 to 12 ips | Refurbished |
| ZT51042-T010000Z | Printer | 203 dpi | Thermal transfer | Up to 12 in/sec | Refurbished |
| ZT51042-T210000Z | Printer | 203 dpi | Thermal transfer | Up to 12 in/sec | Refurbished |
| ZT51043-T010000Z | Printer | 300 dpi | Thermal transfer | Up to 10 in/sec | Refurbished |
| ZT51043-T210000Z | Printer | 300 dpi | Thermal transfer | Up to 10 in/sec | New |
| P1083347-005 | Replacement printhead | 203 dpi | Not listed | Not listed | New |
Found your ZT510 part number?
Request a quote for one printer or a full line, and list every part number and quantity you need.
Common questions
What is the Zebra ZT510 used for?
The ZT510 is a 4 inch industrial thermal label printer for high duty carton, shipping, product and compliance labels in warehouses, distribution centers and production lines.
Is the Zebra ZT510 a replacement for the 105SL Plus?
Zebra presents the ZT510 as taking the 105SL Plus to a new level with expanded performance and value, and as a cost effective industrial printer that builds on the 105SL Plus. It is a common choice when retiring 105SL Plus printers.
What is the difference between ZT51042 and ZT51043?
In our listing, ZT51042 part numbers are 203 dpi and recorded at up to 12 inches per second, while ZT51043 part numbers are 300 dpi and recorded at up to 10 inches per second.
Is the Zebra ZT510 discontinued?
At the time of writing, Zebra still has a ZT510 product page and support page, neither showing a discontinuation notice or replacement model. Check the Zebra support page for the latest status before a large rollout.
Does the ZT510 have Wi-Fi?
Every ZT510 in our listing is recorded with serial, USB, Bluetooth Low Energy and Gigabit Ethernet. Zebra lists dual band Wi-Fi as an optional card, so confirm it is fitted on the unit you order.
What warranty comes with a ZT510 from Tech Seller USA?
Every ZT510 we sell, new or refurbished, carries the 30-Day Tech Seller USA warranty. Manufacturer warranty is not guaranteed.
Ready to order a ZT510?
Send the part number you are replacing, your label size, print method and quantity, and we will confirm the configuration before quoting.




