Printronix T420 Direct Thermal Printer: T400 Specs and Guide
The Printronix T420 direct thermal printer is the compact 4 inch desktop model in the Printronix T400 series, built to print shipping, pick and product labels from a desk, a packing bench or a small office without a ribbon. The unit in our listing, T420-110, is a 203 dpi direct thermal printer with USB, serial and Ethernet, and our listing records it as new.
The T400 series has a long installed base, and many buyers arrive here because they already run T420 printers and want a matching unit, or because a host system was set up around one. This guide covers what the T420 is for, who it suits, the labels it takes, how ZPL and EPL emulation helps when you swap it in, and the lifecycle facts you should plan around. If you only need the numbers, go straight to the T420-110 specifications table.
In this guide
- Products in our listing
- Printronix T420-110 specifications in our listing
- What the Printronix T420 is for
- Who the T420 suits, and who should look elsewhere
- Printronix T420 direct thermal printer: what it means for your labels
- Printronix T420 labels, rolls and print width
- Setup, drivers and Printronix T420 ZPL emulation
- Lifecycle and Printronix T400 replacement
- T420 compared with other Printronix printers in our listing
- Keeping a T420 printing well
- Common questions
Products in our listing
The T420 we list is below; the card links to the full product page, and the part number is the reference to quote when you order.
The T420-110 in our listing is new and carries the 30-Day Tech Seller USA warranty. Browse the full Printronix printer range.
Need one T420 or a matching set?
Send the part number and quantity, and we will confirm the configuration and quote.
Printronix T420-110 specifications in our listing
Every value below comes from our product record for T420-110. Where a value is not recorded, the table says so rather than filling the gap.
| Specification | T420-110 (our listing) |
|---|---|
| Part number | T420-110 |
| Model | Printronix T420 (T400 series) |
| Product type | Desktop label printer |
| Condition | New |
| Print method | Direct thermal |
| Print resolution | 203 dpi |
| Max print width | 4 inches |
| Connectivity | USB, Serial, Ethernet |
| Interface detail | Serial RS-232, USB 2.0, Ethernet 10/100 Base-T |
| Media | 1 in core labels |
| Print speed | Not listed |
| Memory | Not listed |
| Listed weight | 4.3 lbs |
| Warranty | 30-Day Tech Seller USA |
The Printronix T400 data sheet (revision 01/17) adds detail that our record does not hold: up to 6 ips at 203 dpi, a maximum print width of 4.25 in, media from 0.7 in to 4.5 in wide, a maximum roll diameter of 5 in on a 1 in core, 64 MB SDRAM and 128 MB flash, and a printer weight of 4.32 lbs. Treat those as the series specification and our table as the record for this unit.
What the Printronix T420 is for
The Printronix T420 direct thermal printer is a small, simple label printer. It has no ribbon path, a short media path and a footprint the data sheet puts at 7 in wide, 6.5 in high and 7.6 in deep, so it fits beside a monitor or on a packing table. Direct thermal printing makes it quick to load and cheap to run: you change a roll of labels and carry on.
The work it suits is the work most desktop printers do every day. Shipping labels for parcel carriers, pick and pack labels, bin and shelf labels that are replaced often, receiving labels, specimen or sample labels that are used within days, and simple product or price labels. In each case the label is read soon after it is printed, and nobody needs it to survive years of sunlight, heat or abrasion.
Because the T420 speaks the same label languages many host systems already send, it is also a common choice as a like for like unit in an operation that standardized on the Printronix T400 printer years ago. A matching printer means the same media, the same settings and the same habits for staff, and that is often worth more than a newer feature list.
Who the T420 suits, and who should look elsewhere
The T420 fits a single workstation or a small team that prints a steady stream of 4 inch or smaller labels. Typical buyers are an ecommerce or fulfillment bench, a shipping desk in a distribution office, a small warehouse, a clinic or lab front desk, and an IT or facilities team that needs a spare for an existing T400 fleet. For a multi-site rollout, the value is in standard media and settings across every bench, so order the units together and set them up from one configuration.
Look elsewhere in three cases. First, if labels must last, such as asset tags, outdoor labels or labels that see chemicals, you need thermal transfer, which the T420 does not do. Second, if you print many thousands of labels a day without a break, size an industrial printer to the volume; our guide to industrial versus desktop label printers explains where the line falls. Third, if you are buying for a long service life with maker support, the lifecycle section below matters more than any specification.
Printronix T420 direct thermal printer: what it means for your labels
Our listing records the T420-110 as direct thermal, and the T400 data sheet lists direct thermal only. The printhead darkens a heat-sensitive coating on the label itself, with no ribbon in between. The benefits are simple loading, no ribbon cost and no ribbon wrinkles. The trade off is durability: direct thermal labels darken with heat, fade with light and smear with rubbing, so they suit labels that are read within days or weeks.
A useful test is to print your real label, leave it where it will live for the expected period, and scan it again at the end. Shipping labels almost always pass. Labels stuck on equipment in a warm room or a sunny window often do not. Our guide on direct thermal versus thermal transfer printing goes deeper, and the label media and ribbon selection guide helps you pick a direct thermal stock with the right topcoat for your environment.
Printronix T420 labels, rolls and print width
Our listing records a 4 inch maximum print width and 1 in core labels. The T400 data sheet lists media from 0.7 in to 4.5 in wide, a 1 in core and a maximum outer roll diameter of 5 in. In practice that means the common 4 by 6 inch shipping label, 4 by 4 and 4 by 2 inch warehouse labels, and smaller product and bin labels all fit. Larger rolls on 3 in cores, which industrial printers take, do not fit this printer, so order media for a 1 in core with a roll diameter of 5 in or less.
Resolution is 203 dpi on the T420-110. That is the standard for shipping and warehouse labels: linear barcodes and normal text print cleanly, and carrier labels are designed around it. If you need very small text or dense 2D codes on small labels, a 300 dpi printer is the better choice. Our 203 vs 300 vs 600 dpi guide explains how to decide, and the shipping label compliance guide covers what carriers expect from a printed label.
The data sheet lists a cutter and a peel option for the series. Our record for the T420-110 does not list either, so treat this unit as a tear off printer unless we confirm otherwise when you ask. Our guide to printer media handling modes explains when tear off, peel and cut make a difference.
Setup, drivers and Printronix T420 ZPL emulation
Our listing records serial RS-232, USB 2.0 and Ethernet 10/100 Base-T on the T420-110, which matches the standard interfaces on the T400 data sheet. USB suits a single PC. Ethernet makes the printer a shared device that several PCs or a warehouse system can print to; give it a DHCP reservation or a static address so jobs keep finding it. Serial still matters where a scale, a terminal or an older system drives the printer directly. Our guide on printer connectivity options helps you choose.
The T400 data sheet lists EPL, ZPL and ZPL2 as supported languages. That matters when you replace a printer that a shipping platform, ERP or warehouse system drives with raw label code. In many cases the host keeps sending the same ZPL and the T420 prints it. Emulation is not a guarantee that every command, font or graphic behaves the same, so send your real label formats to one unit and scan the results before you change a fleet. Our guide to ZPL versus ESC/POS printer command languages explains how label languages differ from receipt languages.
Label design software and Windows drivers for the T420 are widely available from third party label software makers, and the printer appears under both the Printronix and Printronix Auto ID names. Because the T400 series is past its maker support date, download and keep a copy of the driver and any configuration files you rely on, and record each printer settings page so a replacement can be set up the same way.
Lifecycle and Printronix T400 replacement
Printronix sold its thermal and AIDC printer business to TSC Auto ID Technology in a deal announced on November 9, 2015, and the business has operated as Printronix Auto ID within TSC since then. TSC now publishes the lifecycle dates for the Printronix Auto ID range.
On the TSC discontinued products list, the T400 shows a product discontinue date of 10/1/2019 and a service and support end date of 12/31/2024. TSC names the DA210-DA220 Series as the replacement. In plain terms, the T420 is no longer made, and maker service and support for the series have ended.
That does not make the Printronix T420 direct thermal printer a poor buy. It is a simple printer, and a well kept direct thermal desktop unit can run for years. It does change how you plan. Keep a spare unit or a spare printhead and platen roller for each site where downtime hurts, keep media standard across the fleet, and set a date to review a move to a current model. Our guides on end of life hardware spares strategy and hardware lifecycle refresh planning walk through how to do that without a rushed replacement later.
T420 compared with other Printronix printers in our listing
The table compares the T420 with the other current Printronix families we list. Values come from our product records.
| Part number | Model | Type | Print method | Resolution | Max print width | Print speed | Condition |
|---|---|---|---|---|---|---|---|
| T420-110 | T420 (T400 series) | Desktop | Direct thermal | 203 dpi | 4 inches | Not listed | New |
| T820-110-0 | T820 (T800 series) | Desktop | Thermal transfer / direct thermal | 203 dpi | 4.1 in | Up to 8 ips | Refurbished |
| T6E2X4-1101-00 | T6000e | Industrial | Thermal transfer / direct thermal | 203 dpi | 4.1 in | Up to 14 ips | Refurbished |
The Printronix T820 is the step up on the desk. It adds thermal transfer for durable labels, a color LCD and up to 8 ips in our listing, and suits a shared bench that prints both shipping labels and labels that must last. Note that TSC lists the T800 series as discontinued on 06/30/2026 with support to 06/30/2031. The Printronix T6000e is an industrial printer with a metal build, thermal transfer and direct thermal, and up to 14 ips at 203 dpi in our listing, for lines and docks that print all shift. For a model by model view of the larger industrial range, see our Printronix T8000 industrial label printer guide.
Matched your labels to the T420?
Request a quote for one unit or several, and include media sizes and any other part numbers you need.
Keeping a T420 printing well
Most problems on a direct thermal desktop printer come from three places, and all three are easy to check.
The printhead is a wear part. A thin white line running through every label usually means a failed element, and cleaning will not fix it. Clean the head with the right swab when you change rolls, and see printhead failure diagnosis and replacement if lines appear.
The platen roller pulls the label past the head. Adhesive build up and flat spots cause drift, skew and patchy darkness that often get blamed on the head. Our thermal printer maintenance guide covers cleaning intervals.
Darkness and speed settings decide how a barcode scans. Too dark and bars bleed; too light and they break up. Print a test label, scan it with the scanners your team uses, and adjust in small steps. The label printer troubleshooting guide covers gap sensing, calibration and other common faults.
Our listing records the T420-110 as new. If you are adding units to an existing T400 fleet, also check the condition and age of the printers you already run, because the oldest unit usually sets the date for a fleet refresh. Our refurbished hardware grading guide explains the condition terms we use across the store. You can also browse the full printers and scanners range.
Common questions
Is the Printronix T420 the same as the T400?
The T420 is part of the Printronix T400 desktop series. The T400 data sheet lists the series at 203 dpi and 300 dpi, and the T420-110 in our listing is the 203 dpi direct thermal version. When you search for drivers, manuals or parts, search under both T420 and T400.
Is the Printronix T420 discontinued?
Yes. TSC Auto ID, which now owns the Printronix Auto ID thermal business, lists the T400 with a product discontinue date of 10/1/2019 and a service and support end date of 12/31/2024, and names the DA210-DA220 Series as the replacement. Plan spares and a future replacement accordingly.
Does the Printronix T420 need a ribbon?
No. Our listing records the T420-110 as direct thermal, and the T400 data sheet lists direct thermal printing only. It prints onto heat-sensitive labels without a ribbon, which suits shipping, pick and other short life labels.
Can the Printronix T420 print ZPL labels?
The T400 data sheet lists EPL, ZPL and ZPL2 as supported languages, so a host that already sends ZPL or EPL can often print to it. Test your real label formats first, because emulation does not guarantee that every command behaves exactly as on the original printer.
What label sizes does the Printronix T420 take?
Our listing records a 4 inch maximum print width and 1 in core labels. The T400 data sheet lists media from 0.7 in to 4.5 in wide on a 1 in core with a maximum roll diameter of 5 in, which covers 4 by 6 inch shipping labels and smaller product labels.
Is the T420-110 new or refurbished, and what warranty applies?
Our listing records the T420-110 as new. It carries the 30-Day Tech Seller USA warranty. Manufacturer warranty is not guaranteed, and because the T400 series is past its maker support end date, plan support on that basis.
Ready to order the T420-110?
Send the quantity and your label sizes, and we will confirm the order details before quoting.

