TSC Alpha-4L Mobile Label Printer: 4 Inch Specs and Guide
The TSC Alpha-4L mobile label printer is a 4 inch direct thermal belt printer for shipping labels, pick and pack labels, delivery documents and receipts printed away from a desk. Our listing records a 4.09 inch print width at 203 dpi, 4 ips, a 5800 mAh battery, an LCD, and USB, serial, Bluetooth and Wi-Fi on part number 99-052A001-0401, which suits warehouse and route work that needs more than one way to connect.
TSC has since discontinued the Alpha-4L and named the Alpha-40L as its replacement, so this guide is written for two kinds of buyer: teams adding units to an existing Alpha-4L fleet, and buyers weighing the Alpha-4L against newer 4 inch models. For the numbers only, go to the Alpha-4L specs table or the Alpha-4L vs Alpha-40L table.
In this guide
- Products in our listing
- TSC Alpha-4L specs from our listing
- What the TSC Alpha-4L mobile label printer is built for
- Lifecycle: discontinued, with a named Alpha-4L replacement
- Alpha-4L vs Alpha-40L
- Interfaces and setup
- Media and print method
- Battery, durability and care
- How the Alpha-4L compares with other 4 inch mobile printers
- Checks before you order
- Common questions
Products in our listing
The Alpha-4L part number we list is below. The card opens the product page, and the part number on the card is the one to quote when you order.
Condition: new. It carries the 30-Day Tech Seller USA warranty; manufacturer warranty is not guaranteed.
Keeping an Alpha-4L fleet running?
Send the part number and the number of units you need, from one spare to a full team, and we will quote matching printers.
TSC Alpha-4L specs from our listing
Every value below comes from our product record for 99-052A001-0401. Anything we do not record is marked Not listed.
| Specification | 99-052A001-0401 |
|---|---|
| Family | Alpha-4L |
| Product type | Mobile label printer |
| Condition | New |
| Print method | Direct thermal |
| Resolution | 203 dpi |
| Print speed | 4 ips (102 mm/sec) |
| Maximum print width | 4.09 in (104 mm) |
| Media width | Not listed |
| Memory | 16 MB flash, 32 MB SDRAM |
| Display | LCD |
| Connectivity | USB, Serial, Bluetooth, Wi-Fi |
| Battery | 5800 mAh rechargeable Li-ion |
| Sealing | IP54 with protective case |
| Dimensions | 160 x 191.6 x 79 mm |
| Weight | 2.43 lbs |
| Warranty | 30-Day Tech Seller USA |
What the TSC Alpha-4L mobile label printer is built for
A 4 inch mobile printer exists so the label gets printed where the item is, not at a fixed station. The TSC Alpha-4L mobile label printer handles 4 by 6 inch carrier labels, pallet and tote labels, pick tickets, cycle count and replenishment labels, delivery manifests and route receipts. Warehouse teams clip it to a belt or mount it on a cart; drivers keep it in the cab and print at the door. Our mobile label printer buying guide covers how 4 inch units compare with 2 and 3 inch models, and the shipping label compliance guide covers what a carrier label must carry.
TSC's datasheet lists a 1.1 kg (2.43 lb) weight with battery, matching our listing, plus a 90 inch maximum print length, a 2 to 3 ips peel mode and a microSD slot for flash expansion up to 4 GB. It is heavier than a 3 inch printer, so it suits shift work where 4 inch labels are the main output. If your labels are 3 inches or narrower, a lighter model such as the TSC Alpha-30R Premium (A30RP-A001-0001) or the Alpha-3R (99-048A062-0201) will be easier to carry all day.
Lifecycle: discontinued, with a named Alpha-4L replacement
TSC's US discontinued products list shows the Alpha-4L Series with a product discontinue date of 09/03/2023 and a service and support discontinue date of 09/30/2028, and lists the Alpha-40L as the replacement model. TSC's Asia Pacific list gives the same dates. TSC also notes that support may be reduced if its suppliers stop sourcing the necessary parts, so plan spare batteries, chargers and printheads with that window in mind.
Two buying paths follow. If you already run Alpha-4L printers, adding matching units keeps one set of formats, chargers, cases and settings, and avoids requalifying every label. If you are building a new 4 inch fleet, look at the Alpha-40L first, because it is TSC's current 4 inch Alpha model. Our TSC label printer range guide explains why the full part number should drive every order.
Alpha-4L vs Alpha-40L
Both print 4.09 inches wide at 203 dpi, so label sizes carry over. The table compares our listings directly.
| Item | Alpha-4L | Alpha-40L (new) | Alpha-40L (refurbished) |
|---|---|---|---|
| Part number | 99-052A001-0401 | A40L-A001-0001 | A40L-A001-1001 |
| Print speed | 4 ips | Up to 5 ips | 5 ips |
| Maximum print width | 4.09 in | 4.09 in | 4.09 in |
| Memory | 16 MB flash, 32 MB SDRAM | 128 MB SDRAM, 128 MB flash, microSD up to 32 GB | 128 MB flash, 128 MB DRAM |
| Display | LCD | Color LCD with buttons | LCD |
| Connectivity | USB, Serial, Bluetooth, Wi-Fi | USB, Bluetooth | USB, Bluetooth |
| Battery | 5800 mAh Li-ion | Not listed | 6200 mAh smart battery |
| Weight | 2.43 lbs | 2.17 lbs | 2.2 lbs |
| Condition | New | New | Refurbished |
The Alpha-40L units we list are faster, carry far more memory and weigh less. The Alpha-4L we list keeps one practical advantage: it records serial and Wi-Fi alongside USB and Bluetooth, while our Alpha-40L units record USB and Bluetooth only. If your workflow sends labels over the warehouse wireless network, or a legacy device drives the printer over serial, that interface set matters more than speed. If your team pairs each printer to one handheld over Bluetooth, the Alpha-40L is the more current choice.
Interfaces and setup
TSC's datasheet lists USB 2.0 and Bluetooth as standard on the Alpha-4L, 802.11 a/b/g/n Wi-Fi as a factory option and RS-232 serial as a user option. Our 99-052A001-0401 listing records all four, which covers the common setups: Bluetooth pairing to a handheld, Wi-Fi printing from a warehouse system, USB for setup and firmware, and serial for older equipment. Because Wi-Fi is a factory option, confirm the build on the unit before you plan a network rollout. Our printer connectivity guide compares these links, and warehouse Wi-Fi for mobile devices covers coverage planning.
For languages, TSC's datasheet lists TSPL-EZ, described as compatible with EPL, ZPL and ZPL II, plus ESC-POS and CPCL emulation. That helps when an app was built for another brand, but test your real formats first; our guide to ZPL vs ESC/POS command languages explains what can differ. On Wi-Fi, give each printer a fixed address or DHCP reservation so queues do not break after a restart, and stage settings once for the whole fleet as described in printer firmware and fleet configuration.
Need Alpha-4L units with Wi-Fi or serial?
Tell us the interfaces your workflow uses and your quantity, and we will confirm the build in the quote.
Media and print method
The TSC Alpha-4L mobile label printer is direct thermal only. It needs heat sensitive labels or receipt paper and no ribbon. That suits shipping, pick and delivery labels that live for days or weeks, but not labels that must survive years of sunlight or heat; see direct thermal vs thermal transfer printing. TSC's datasheet lists media from 2.0 to 4.4 inches wide and a maximum roll outside diameter of 2.65 inches. Our listing does not record a media width, so match your roll against TSC's figures and use the label media selection guide to choose facestock and adhesive.
Peel mode lets the printer separate the label from its liner so the worker can apply it straight away; TSC lists 2 to 3 ips in peel mode. Calibrate the media sensor whenever you change label type, because gap and black mark stock need different settings.
Battery, durability and care
Our listing records a 5800 mAh rechargeable Li-ion battery, and TSC's datasheet gives 7.2 V DC. TSC gives a drop rating of 5 feet (1.5 m), or 6 feet (1.8 m) with the protective case, and IP54 with that case. Our listing records IP54 with the Alpha-4L protective case, so confirm whether a case is part of your order if you rely on that rating. TSC does not state a runtime per charge in its datasheet; pilot a full shift with your real label mix and wireless settings before sizing spare batteries. Store and ship spares as covered in device battery safety, storage and shipping.
Clean the printhead when you change rolls and keep adhesive off the platen, especially in peel mode where label edges can leave residue. A white line through every barcode usually means a damaged printhead element; see printhead failure diagnosis and the thermal printer maintenance guide.
How the Alpha-4L compares with other 4 inch mobile printers
If you are not tied to TSC, other 4 inch mobile printers cover the same jobs. Our guides to the Zebra ZQ630 and the SATO PW4NX set out their specs and use cases. The deciding questions are the same for every brand: which language your app sends, which wireless link you use, how long a shift runs, and whether you need a case for dust and splash protection. You can also browse TSC printers or all printers.
Checks before you order
- Part number. Quote 99-052A001-0401 in full, or read the part number from your existing printers if you are matching a fleet.
- Interfaces. Confirm Wi-Fi and serial on the unit if your workflow depends on them.
- Media. Check width (2.0 to 4.4 inches per TSC) and the 2.65 inch roll limit.
- Language. Test your real formats on one printer.
- Accessories. Plan the protective case, chargers and spare batteries separately.
- Support window. TSC lists service and support through 09/30/2028; plan replacements before then.
Our 99-052A001-0401 is new. If you add refurbished printers to the same fleet, such as the refurbished Alpha-40L above, our guide to refurbished hardware grading explains what to inspect on arrival.
Common questions
Is the TSC Alpha-4L discontinued?
Yes. TSC's US discontinued products list shows the Alpha-4L Series with a product discontinue date of 09/03/2023 and service and support through 09/30/2028, and names the Alpha-40L as the replacement model. Our 99-052A001-0401 is listed in new condition.
What replaced the TSC Alpha-4L?
TSC names the Alpha-40L as the replacement. In our listing, the Alpha-40L records up to 5 ips and 128 MB of flash and RAM, against 4 ips, 16 MB flash and 32 MB SDRAM on the Alpha-4L. Both print 4.09 inches wide at 203 dpi.
Can the Alpha-4L print 4 by 6 inch shipping labels?
Yes. Our listing records a 4.09 inch maximum print width, and TSC's datasheet lists media from 2.0 to 4.4 inches wide with a maximum roll of 2.65 inches outside diameter. Check that your label roll fits that diameter, because desktop rolls are often larger.
What is the Alpha-4L battery?
Our listing records a 5800 mAh rechargeable Li-ion battery, and TSC's datasheet gives 7.2 V DC. TSC does not state a runtime per charge in that datasheet, so test a full shift with your real labels before you size spare batteries for a fleet.
Is the TSC Alpha-4L waterproof?
TSC does not describe it as waterproof. TSC's datasheet gives IP54 with the protective case, and a 5 foot drop rating, or 6 feet with the case. Our listing records IP54 with protective case, so confirm a case is part of your order if you need that rating.
Does the Alpha-4L print ZPL?
TSC's datasheet lists TSPL-EZ, compatible with EPL, ZPL and ZPL II, plus ESC-POS and CPCL emulation. Emulation covers common commands, so print your real formats on one unit before you deploy more.
Ready to order the TSC Alpha-4L?
Request a quote for 99-052A001-0401, for one unit or many, and we will confirm the build before it ships.

