Buying Guide

Star Micronics mC-Print3 Receipt Printer: Specs and Buying Guide

Sarah Jane Nov 19, 2026 5 min read
Star Micronics mC-Print3 Receipt Printer: Specs and Buying Guide

The Star Micronics mC-Print3 receipt printer is a compact 3 inch thermal POS printer built for tablet and cloud based checkouts in retail, hospitality and quick service counters. Our listing covers part number 37950380, a new mC-Print3 with WLAN, Ethernet and USB, a 400 mm/sec print speed and an auto cutter, and this guide explains what that configuration gives you on the counter.

You will find the store specs, how the mC-Print3 connects to a POS, what paper and peripherals it takes, and how it compares with the Star TSP143IV and other receipt printers we cover. If you only need the numbers, go straight to the mC-Print3 specs table.

Products in our listing

The mC-Print3 we list is below, and the card opens the full product page with the part number to quote.

This 37950380 is listed as new and carries the 30-Day Tech Seller USA warranty. Manufacturer warranty is not guaranteed. Browse the full Star Micronics printer range.

Need one mC-Print3 or several for multiple registers?

Send your quantity and POS software and we will confirm the configuration and quote.

Request a Quote

Star Micronics mC-Print3 37950380 specs in our listing

The table shows the store data for this part number. Values that are not in our listing are marked as not listed, so check the product page or ask us before relying on them.

Feature 37950380 (our listing)
Part number 37950380
Condition New
Printer type Thermal POS receipt printer
Paper width 3 inches; 80 mm standard, 58 mm with paper guide
Max print width 72 mm on 80 mm paper, 51 mm on 58 mm paper
Print resolution 203 dpi (8 dots/mm)
Print speed 400 mm/sec
Connectivity WLAN, Ethernet, USB
Ports WLAN, Ethernet (LAN), USB-B, USB-A, DK port, DC 24V
Cutter Auto cutter, guillotine, partial cut, rated 2 million cuts
Media Thermal receipt paper roll, 80 mm or 58 mm
Dimensions 132 x 140 x 125 mm (W x D x H)
Weight 2.9 lbs
Command emulation Not listed
Warranty 30-Day Tech Seller USA

What the Star Micronics mC-Print3 receipt printer is built for

Star Micronics designed the mC-Print3 for modern point of sale, where the register is often a tablet or a cloud POS app rather than a Windows PC. Its footprint in our listing is 132 x 140 x 125 mm, small enough for a crowded counter or a pop up stand, and Star sells it in black or white so it fits a front of house setting.

Speed matters at a busy counter. Our listing shows 400 mm/sec on this part number, which Star lists for the mC-Print3 MCP31 models, so a typical receipt is out and cut almost as soon as the sale closes. The guillotine auto cutter makes a partial cut and is rated in our listing for 2 million cuts, which suits stores and kitchens that print hundreds of receipts and tickets a day.

The Star Micronics mC-Print3 receipt printer is also a small connectivity hub. Our listing shows a USB-A port alongside USB-B, and Star lists a barcode scanner, a customer display and the mC-Sound speaker as peripherals for the range. That lets one printer carry the scanner and display for a tablet register, cutting down on cables and adapters. Our guide to POS peripherals, cash drawers and displays covers how these pieces fit together.

Who the 37950380 suits

This WLAN, Ethernet and USB configuration fits several kinds of buyer:

  • Retail stores and boutiques running a tablet POS that needs a fast, compact receipt printer.
  • Cafes, restaurants and quick service counters that need receipts and order tickets printed fast at the counter.
  • Pop up, market and seasonal sites where WLAN avoids running network cable to every register.
  • Multi location operators standardizing on one receipt printer across several stores and managing them through a cloud POS.

One printer for a single register and a set of printers for a chain both fit this model. For larger rollouts, our multi site POS hardware rollout guide walks through staging, labeling and configuring printers before they reach each store.

Connectivity: WLAN, Ethernet and USB

Our listing shows WLAN, Ethernet and USB on this unit. Each fits a different setup:

  • Ethernet is the most reliable choice for a fixed register, and lets several devices print to the same printer over the network.
  • WLAN removes the network cable, which helps on islands, pop ups and counters far from a network drop. Plan for a strong, stable signal at the counter, because receipts that wait on weak Wi-Fi slow the line.
  • USB connects the printer straight to a PC or compatible tablet setup and suits a single register with no network.

Distributor listings identify 37950380 as a black mC-Print3 WLAN model. Star's mC-Print3 page lists Bluetooth only on specific model codes, and our listing does not show Bluetooth on this unit, so do not plan on Bluetooth pairing. Our printer connectivity guide compares USB, Ethernet and wireless in more depth, and the print server vs direct IP printing guide covers how to address network printers.

Software, mC-Print3 CloudPRNT and setup

Star lists StarPRNT as the command emulation for the mC-Print3, with free SDKs for iOS, Android and Windows so POS apps can print natively, from the web or from the cloud. Star also lists CloudPRNT, which lets a cloud POS send print jobs to the printer over the internet without a local print server, and Star Micronics Cloud Services for remote management on supported firmware.

The practical step before you buy is to confirm that your POS software supports the mC-Print3 or CloudPRNT. Most tablet POS platforms list supported printers by model. If your system only sends ESC/POS commands, check before ordering, because Star does not list ESC/POS on its mC-Print3 pages. Our guide to printer command languages explains why this matters.

At setup, load paper, connect the network, print a self test to confirm the IP address, then add the printer in your POS app. Star lists a utility app for iOS and Android that helps set a static IP. Give each printer a fixed address so receipts do not stop after a router restart.

Paper and printing

The Star Micronics mC-Print3 receipt printer is an 80mm thermal receipt printer, so it uses thermal receipt paper and needs no ink or ribbon. Our listing shows 80 mm paper as standard, with a print width of 72 mm, and 58 mm paper with the paper guide, with a print width of 51 mm. Star gives a maximum roll diameter of 83 mm. Use paper made for thermal receipt printers and match the roll to the guide setting.

Paper choice affects how long receipts stay readable and how often you change rolls. Our guide to receipt paper rolls, sizes and types covers widths, core sizes and thermal grades. For general care, keep the print head and paper path clean of paper dust; the thermal printer maintenance guide gives a simple routine.

mC-Print3 vs TSP143IV and other receipt printers

The comparisons below use our store data and published guides. Check each product page for the exact configuration.

  • mC-Print3 vs TSP143IV: both print 203 dpi on 80 mm paper. Our TSP143IV-UE is listed at up to 250 mm/sec with USB and Ethernet, and its store data includes StarPRNT, ESC/POS emulation and CloudPRNT. The mC-Print3 37950380 is listed at 400 mm/sec, adds WLAN and has a smaller footprint. The Star TSP143IV guide covers that model in detail.
  • mC-Print3 vs Star SM-S230i: the SM-S230i is a 2 inch Bluetooth mobile printer for line busting and table side use. See SM-S230i and the SM-S230i guide if staff need to print away from the counter.
  • mC-Print3 vs Epson: if your POS is built around Epson printers, compare the Epson TM-m30III guide for a compact counter printer and the Epson TM-T88VII guide for a high volume workhorse.
  • Linerless and specialist options: the Bixolon SRP-S300 guide covers a linerless POS printer if you want to cut liner waste.

For a wider view of thermal and impact receipt printers, read our POS receipt printer buying guide, or browse all printers.

Buying checklist for an mC-Print3

  • Confirm your POS software supports the mC-Print3, StarPRNT or CloudPRNT.
  • Decide between WLAN, Ethernet and USB for each register, and plan a fixed IP for network printers.
  • Confirm paper width, 80 mm or 58 mm, and stock thermal rolls up to 83 mm in diameter.
  • List the peripherals you want on the printer, such as a cash drawer, scanner or customer display.
  • For several sites, stage and label printers before shipping so each store plugs in and prints.

Ordering

Send the part number, the POS software you use, how each register connects, and how many units you need. We will confirm the mC-Print3 configuration before quoting. Returns are accepted within 30 days, with a 25% restocking fee that is waived for defective or wrongly shipped items, and we ship with FedEx and DHL.

Comparing the mC-Print3 with the TSP143IV?

Tell us your POS software and register setup and we will recommend the right Star model.

Request a Quote

Common questions

What is the Star mC-Print3 37950380?

37950380 is a Star Micronics part number for an mC-Print3 3 inch thermal receipt printer. Our listing describes it as a new unit with WLAN, Ethernet and USB, an auto cutter, 203 dpi printing and a print speed of 400 mm/sec. Distributor listings identify it as a black mC-Print3 WLAN model.

Does the mC-Print3 work with tablets and cloud POS systems?

Star lists free SDKs for iOS, Android and Windows for the mC-Print3 series, plus CloudPRNT support so a cloud POS can send receipts to the printer over the internet. Check that your POS software lists the mC-Print3 or CloudPRNT before you order.

What paper does the mC-Print3 use?

It uses thermal receipt paper. Our listing shows 80 mm paper as standard and 58 mm with the paper guide, with a print width of 72 mm on 80 mm paper and 51 mm on 58 mm paper. Star gives a maximum roll diameter of 83 mm.

Can I connect a cash drawer and scanner to the mC-Print3?

Yes. Our listing shows a DK port for a cash drawer and a USB-A port alongside USB-B. Star lists a barcode scanner, a customer display and the mC-Sound speaker among the peripherals the mC-Print3 range can host. Confirm the exact accessory with us before you order.

Is the mC-Print3 faster than the TSP143IV?

On our store data, yes. The mC-Print3 37950380 is listed at 400 mm/sec, while the TSP143IV-UE we list is up to 250 mm/sec. Both print 203 dpi on 80 mm paper, so the choice usually comes down to footprint, connectivity and the peripherals you want to attach.

Does the mC-Print3 support ESC/POS?

Star lists StarPRNT as the emulation for the mC-Print3 and does not list ESC/POS on its mC-Print3 pages. If your POS software only speaks ESC/POS, check its printer list or ask us before you order, because the TSP143IV we list includes ESC/POS emulation in our store data.

Ready to order a Star mC-Print3?

Send the part number and quantity and we will confirm the configuration and quote.

Request a Quote
Sarah Jane

Sarah Jane

Senior IT Hardware Specialist · Tech Seller USA
Sarah helps businesses and IT teams source the right enterprise hardware with exact part numbers. View profile