Custom D4 102 Label Printer: Specs and Buying Guide
The Custom D4 102 label printer is a compact 4 inch desktop printer from the maker Custom that runs both thermal transfer and direct thermal printing at 203 dpi. It suits counters, pack benches and small production lines that need steady shipping, product, shelf and identification labels without the footprint of an industrial printer, and it can work from ribbon for durable labels or from direct thermal stock for short life labels.
This guide covers the two D4 102 part numbers in our listing, what Custom states about the platform on its spec sheet, how the USB and Ethernet versions differ, which media and ribbon to plan for, and what to check before you order one printer or a set for several stations. For the numbers only, go to the D4 102 specs table or the full range table.
In this guide
- Products in our listing
- Custom D4 102 specs in our listing
- What the Custom D4 102 label printer is for
- Who the D4 102 suits
- Key configuration choices: 911MK010500J33 vs 911MK010100233
- Media and ribbon for the D4 102
- Setup, the Custom D4 102 driver and command languages
- How the D4 102 compares with other 4 inch desktop printers
- What to check when your D4 102 arrives
- Full Custom D4 102 range in our listing
- Common questions
Products in our listing
Both Custom D4 102 part numbers we list are below. Each card opens the product page, and the part number on the card is the one to quote when you order.
Both part numbers are new. Every unit carries the 30-Day Tech Seller USA warranty; manufacturer warranty is not guaranteed. Browse the full Custom range or all printers.
Setting up one station or a row of pack benches?
Send the part numbers and quantities and we will confirm the configuration and quote.
Custom D4 102 specs in our listing
Values below come from our two product pages. Where a value is not recorded for a part number, it shows as not listed.
| Spec | 911MK010500J33 | 911MK010100233 |
|---|---|---|
| Condition | New | New |
| Print method | Thermal transfer / direct thermal | Thermal transfer / direct thermal |
| Resolution | 203 dpi | 203 dpi |
| Max print width | 4 in | 4.09 in |
| Media width | Up to 4.33 in | 15 mm to 110 mm |
| Max print length | Not listed | 3810 mm |
| Print speed | Up to 5 ips | 5 ips |
| Memory | Not listed | 64 MB SDRAM / 128 MB flash |
| Interfaces | USB, USB host, Ethernet | USB |
| Operating temperature | Not listed | 41 to 113 F (5 to 45 C) |
| Weight | 4.4 lbs | 4.4 lbs (2 kg) |
| Warranty | 30-Day Tech Seller USA | 30-Day Tech Seller USA |
What the Custom D4 102 label printer is for
As a Custom D4 label printer, the D4 102 sits in the same class as other 4 inch desktop models: it takes a roll of labels inside the cover, prints up to roughly 4 inches across, and runs from a PC or a network. The 102 in the name matches the 104 mm print head width Custom lists, which covers the common 4 x 6 inch shipping label as well as smaller product, shelf and asset labels. Custom builds the D4 102 to print either through a ribbon or directly on heat sensitive stock, so one printer can handle both a short life shipping label and a longer life product or asset label.
Typical jobs include parcel labels at a pack bench, price and product labels in a stockroom, specimen and bag labels at a pharmacy counter, and part and box labels at the end of a small production line. If you are still deciding between a compact desktop unit and a metal industrial frame, our industrial vs desktop label printer guide sets out where each one fits. For daily volumes in the low thousands of labels and a desk or bench location, a desktop printer like the D4 102 is usually the right size.
Custom lists a print speed of 5 inches per second on its spec sheet, and both of our listings record 5 ips. That is a practical speed for on demand printing, where a label is printed as each order or item is processed, rather than a long batch run. It also lists a maximum print length of 3810 mm, which matters only for long continuous tags or banners.
Who the D4 102 suits
The Custom D4 102 label printer is a good fit for buyers who want a small printer that handles both print methods and does not need a full industrial chassis. Single unit buyers often use it to replace an aging desktop printer at one bench. Multi unit buyers use it to standardize several stations on one model so media, ribbon and driver settings stay the same at every desk.
- Shipping and fulfillment benches that print 4 x 6 inch labels from a carrier or warehouse system, usually on direct thermal stock.
- Retail and stockrooms that print shelf, price and product labels and want thermal transfer for labels that stay on shelves for months.
- Light manufacturing and kitting that print part, box and serial labels from a label design program over the network.
- Healthcare and pharmacy counters that need a compact footprint at a workstation and a mix of label types.
If your labels must survive heat, sunlight, abrasion or chemicals for years, plan on thermal transfer with the right ribbon. Our direct thermal vs thermal transfer guide explains the tradeoff in plain terms.
Key configuration choices: 911MK010500J33 vs 911MK010100233
Both part numbers in our listing share the same core engine: 203 dpi, thermal transfer and direct thermal, and 5 ips. The difference is connectivity. Our 911MK010500J33 listing records USB, USB host and Ethernet, while our 911MK010100233 listing records USB only. Custom states on its spec sheet that Ethernet is built in on the Custom D4 102 Ethernet model and is an optional module on the base D4 102.
Choose 911MK010500J33 when the printer will be shared across a network, driven by a warehouse or ERP system that sends jobs to an IP address, or placed away from a dedicated PC. Ethernet also makes it easier to move the printer between desks without reinstalling a local USB driver on each machine. Our print server vs direct IP printing guide covers how to plan network printing, and the printer connectivity guide compares USB, Ethernet, wireless and serial in more detail.
Choose 911MK010100233 when each printer sits next to one PC and prints only from that PC. A USB printer is simple to install, has no network address to manage, and keeps the setup the same at every bench. Our listing for this part number also records 64 MB SDRAM and 128 MB flash, the same memory Custom lists for the platform, along with an operating range of 41 to 113 F.
Resolution. Both units print at 203 dpi, which is the standard for shipping labels, carton labels and most 1D and 2D barcodes at normal sizes. If you need very small text or tiny 2D codes on small labels, a 300 dpi printer is the better tool. The 203 vs 300 vs 600 dpi guide helps you decide.
Options. Custom lists a peeler kit, a guillotine cutter and an Ethernet module as options for the D4 102. Our listings do not record any of these options as fitted, so ask us when you request a quote if you need a cutter or peeler.
Media and ribbon for the D4 102
Custom lists the following media limits for the D4 102 on its spec sheet: media width from 15 mm to 110 mm, roll outer diameter up to 127 mm on a 25.4 mm (1 inch) core, and media thickness from 0.06 mm to 0.2 mm. Supported media types are continuous, die cut, tag, fan fold and black mark stock. A movable reflective media sensor, a cover open sensor and a ribbon sensor are listed.
For ribbon, Custom lists wax, wax resin and resin types, 25.4 mm to 110 mm wide, up to 100 m long, on a 12.7 mm (half inch) core with a 39 mm maximum outer diameter. That is a short ribbon size typical of compact desktop printers, so buyers who print thousands of thermal transfer labels a day should plan for frequent ribbon changes and keep spare rolls at each station.
The practical rules are simple. Use a ribbon a little wider than the label, match wax to paper labels, wax resin to coated paper and some synthetics, and resin to polyester and polypropylene labels that face heat or chemicals. Our label media and ribbon selection guide covers the pairings, including which ribbon width to stock for each label size you run.
Setup, the Custom D4 102 driver and command languages
Custom lists Windows 32 and 64 bit drivers on its spec sheet, with WHQL certification and silent installation, provided on request. Silent installation is useful when IT teams push the same driver to many PCs. For printing from a design program, install the driver, select the D4 102, set the label size and media type, and calibrate the sensor to your stock before the first full job.
For systems that send raw printer code, Custom lists PEPL, PDPL and PZPL emulations, which are its versions of the EPL, DPL and ZPL command sets used by many existing label formats. If your warehouse or shipping system already prints ZPL, test a few real labels on one D4 102 before you move every station over. Our printer command languages guide explains what each language is and why emulation needs a test run.
After setup, tune darkness and speed for your media: too much heat shortens printhead life and can smear thermal transfer ink, while too little gives faint bars. The print darkness and speed tuning guide walks through the adjustments, and the label printer troubleshooting guide covers skipped labels, sensor errors and ribbon problems.
How the D4 102 compares with other 4 inch desktop printers
The D4 102 competes with other 4 inch, 203 dpi desktop printers that offer both print methods. If you already run a fleet of another brand, the main questions are command language, media core size and ribbon size. A Zebra fleet that prints ZPL will rely on the D4 102 PZPL emulation, so test first. Our Zebra ZD421 guide and Bixolon XD3-40t guide cover two widely used alternatives in the same class.
The Custom D4 102 label printer is a sensible choice when you want a compact unit with both print methods, Ethernet on one model and USB on the other, and a short half inch core ribbon. If you need longer ribbons, higher volume or a metal case, look at an industrial printer instead.
What to check when your D4 102 arrives
Both D4 102 part numbers in our listing are new, but a short acceptance check at each station still saves time later. Our hardware acceptance testing guide has the full process; for a label printer it comes down to a few steps.
- Confirm the part number on the printer label matches your order, and that the interface you need (USB only or USB, USB host and Ethernet) is present.
- Load your own labels and, for thermal transfer, a ribbon of the right width and core, then calibrate the media sensor.
- Print a test label and a real production label, and scan every barcode with the scanner your team actually uses.
- For networked units, set a fixed IP address or reservation and record it with the printer location.
- Clean the printhead on a schedule from day one, using the steps in our thermal printer maintenance guide.
If print quality drops over time, our printhead failure guide helps you tell a dirty head from a worn one, and the barcode verification guide explains how to check that labels scan reliably for your customers and carriers.
Full Custom D4 102 range in our listing
| Part number | Condition | Print method | Interfaces | Product page |
|---|---|---|---|---|
| 911MK010500J33 | New | Thermal transfer / direct thermal | USB, USB host, Ethernet | View 911MK010500J33 |
| 911MK010100233 | New | Thermal transfer / direct thermal | USB | View 911MK010100233 |
Need several D4 102 printers configured the same way?
Tell us the interface, quantity and any cutter or peeler needs and we will quote.
Common questions
What is the difference between the Custom D4 102 part numbers 911MK010500J33 and 911MK010100233?
Both are new 4 inch, 203 dpi desktop printers that run thermal transfer or direct thermal. In our listing, 911MK010500J33 records USB, USB host and Ethernet, while 911MK010100233 records USB only. Custom offers Ethernet as an optional module for the base D4 102.
Does the Custom D4 102 print ZPL?
Custom lists PEPL, PDPL and PZPL emulations on its D4 102 spec sheet, which are its EPL, DPL and ZPL style command sets. Test your existing label formats on one unit before a wider rollout, because emulation covers common commands rather than every feature of the original language.
How wide a label can the Custom D4 102 print?
Custom lists a 104 mm print width and media from 15 mm to 110 mm wide. Our 911MK010100233 listing records a 4.09 inch print width and label widths from 15 to 110 mm, and our 911MK010500J33 listing records up to 4.33 inch media.
What ribbon does the Custom D4 102 use?
Custom lists wax, wax resin and resin ribbons up to 100 m long, 25.4 to 110 mm wide, on a 12.7 mm core with a 39 mm maximum outer diameter. Match the ribbon type to your label face stock and confirm the ink side before ordering in volume.
Which drivers does the Custom D4 102 use?
Custom lists Windows 32 and 64 bit drivers with WHQL certification and silent installation, supplied on request. Plan driver installation and any label software templates before the printers arrive so each workstation can be set up the same way.
Do these Custom D4 102 printers come with a warranty?
Yes. Both part numbers are listed as new and carry the 30-Day Tech Seller USA warranty. A manufacturer warranty is not guaranteed, so register any coverage questions with us when you request a quote.
Ready to order a Custom D4 102?
Request a quote for one printer or a full set of stations.


