TSC MB240T Industrial Label Printer: Specs and Buying Guide
The TSC MB240T industrial label printer is TSC's compact metal printer for sites that have outgrown a desktop model but do not need a full size industrial frame. It prints up to 4 inches wide at 203 dpi, takes an 8 inch label roll and a 450 meter ribbon, and puts a color touch display on the front, which makes it a common pick for shipping benches, small production lines and busy goods-in desks.
This guide explains what the MB240T is built for, how it compares with the newer MB241T and TSC's larger MH341T, which media and ribbons to plan for, and what to check before you buy one unit or a set for several lines. For the numbers only, jump to the MB240T specs table.
In this guide
Products in our listing
The MB240T part number we list is below. The card opens the product page, and the part number shown is the one to quote when you order.
99-068A001-1201 is new. Every unit carries the 30-Day Tech Seller USA warranty; manufacturer warranty is not guaranteed. Browse the full TSC printer range or all printers.
Equipping one bench or several lines?
Send the part number and quantity and we will confirm the configuration and quote.
TSC MB240T specs
The first column comes from our product page for 99-068A001-1201. The second column shows what TSC publishes for the MB240 series, so you can see what our listing does not record.
| Spec | Our listing (99-068A001-1201) | TSC MB240 series datasheet |
|---|---|---|
| Condition | New | Not applicable |
| Print method | Thermal transfer | Thermal transfer and direct thermal |
| Resolution | 203 dpi | 203 dpi (MB240, MB240T) |
| Max print width | 4 inches | About 4.25 in (107 mm) |
| Max print speed | Not listed | 12 ips |
| Interfaces | USB, USB Host, Serial (RS-232), Ethernet | USB 2.0, USB host, RS-232, 10/100 Ethernet |
| Display | Color touch LCD | 3.5 in color touch LCD |
| Memory | Not listed | 128 MB flash, 128 MB SDRAM |
| Media width | Not listed | 0.8 to 4.7 in (20 to 120 mm) |
| Label roll | Not listed | 8 in OD, 1 to 3 in core |
| Ribbon | Not listed | 450 m, 1 in core, 40 to 110 mm wide |
| Listed weight | 20.3 lbs | About 9 to 9.2 kg |
| Warranty | 30-Day Tech Seller USA | Not applicable |
Our listing records thermal transfer as the print method. TSC lists the whole MB240 series as thermal transfer and direct thermal, so if you plan to run ribbon free direct thermal stock, ask us to confirm the unit configuration with your quote.
What the TSC MB240T industrial label printer is built for
TSC positions the MB240 series as a compact industrial label printer: a die-cast print mechanism and a metal cover with a large clear media window, in a footprint closer to a large desktop printer than to a floor standing industrial unit. The point is capacity and durability without the size. An 8 inch outside diameter label roll holds far more labels than the 5 inch rolls most desktop printers take, and a 450 meter ribbon means fewer ribbon changes on a busy shift.
That combination makes the TSC MB240T industrial label printer a good fit for operations printing hundreds to a few thousand labels a day, where a plastic desktop printer runs out of media too often or wears out early, but a full size printer such as the Zebra ZT411 would be more machine than the job needs. Our guide to industrial versus desktop label printers walks through where that line usually falls.
Who the MB240T suits
- Shipping and fulfillment benches: 4 inch carrier labels at 203 dpi, which is the usual resolution for shipping barcodes.
- Goods-in and warehouse labels: carton, bin and pallet labels printed from a warehouse system over Ethernet.
- Light manufacturing: product, carton and work in progress labels on thermal transfer stock that resists rubbing and handling.
- Sites replacing worn desktop printers: teams that want metal construction and bigger rolls without giving up bench space.
It is less suited to very small barcodes and fine text on electronics or pharmaceutical labels. At 203 dpi, small 2D codes and 6 point text lose sharpness, and a 300 dpi printer such as the MH341T is the better fit. Our 203 vs 300 vs 600 dpi guide shows how to pick a resolution from your smallest barcode, and shipping label compliance covers what carriers expect.
Key configuration choices
Touch display or buttons. The T in MB240T means the touch display version. TSC lists a 3.5 inch color touch LCD, which makes calibration, darkness changes and diagnostics easier for operators without a PC. Our listing records a color touch LCD.
Interfaces. Our listing records USB, USB Host, serial RS-232 and Ethernet. Ethernet is the usual choice for warehouse systems and shared printers; serial still matters for older scales and controllers; USB Host lets an operator plug in a scanner or keyboard. TSC lists Bluetooth 4.2 MFi as a factory option and a slot-in Wi-Fi module as an add-on, so a listed unit does not include wireless unless the listing says so. See our printer connectivity guide and the print server vs direct IP guide before you plan a network rollout.
Media handling. TSC lists a peel-off kit, a full guillotine cutter, linerless tear-off and cutter kits, GPIO and an internal rewinder rated for 5 inch rolls as options. Decide early whether labels tear off, peel for an operator to apply by hand, or need cutting, because these are fitted kits rather than settings. Our media handling modes guide explains each one.
TSC MB240T ribbon and media
TSC lists media from 0.8 to 4.7 inches wide on 1 to 3 inch cores, up to 8 inches outside diameter, with continuous, die-cut, black mark, fan-fold and notched stock. Ribbons run up to 450 meters on a 1 inch core, from 40 to 110 mm wide. Size the ribbon slightly wider than the label so the printhead never runs on bare liner.
Ribbon choice follows the label. Wax ribbons on paper labels suit shipping and general warehouse use; wax-resin and resin ribbons on synthetic labels suit parts, chemicals and anything that gets rubbed or wet. Our media and ribbon guide covers the pairings, direct thermal vs thermal transfer explains when you can skip the ribbon, and ribbon wrinkle diagnosis helps if prints streak after a media change.
Setup and TSC MB240T ZPL emulation
TSC lists TSPL-EZD as the MB240 series language and states it is compatible with EPL, ZPL, ZPL II and DPL. In practice that lets many sites move an MB240T into a line that used other brands without rewriting every template, but emulation covers common commands rather than every feature, so print your real formats on one unit first. Our printer command languages guide explains the background.
For Windows printing, TSC refers to its Seagull driver and its Diagnostic Tool for configuration. TSC Console supports remote management of networked TSC printers. Calibrate the media sensor after loading new stock, then set darkness and speed for the label and ribbon pair rather than leaving factory defaults.
MB240T vs MB241T and the MH341T
TSC now presents the MB241 series as its newly introduced compact industrial range. For the MB241T, TSC lists 203 dpi, 12 ips, a 4.21 inch print width, 256 MB of SDRAM and 256 MB of flash, against 128 MB of each on the MB240 series datasheet. TSC does not state that the MB241 replaces the MB240, so treat them as two generations of the same idea. If you already run MB240T printers, staying on the same model keeps spare parts, ribbons and operator training consistent.
Within our listing, the step up is the TSC MH341T, a refurbished 300 dpi, 4 inch printer from TSC's full size MH series with a recorded speed of up to 12 ips, 512 MB of flash and 256 MB of SDRAM. Choose the MH341T for smaller barcodes and heavier duty cycles; choose the MB240T when 203 dpi is enough and bench space is tight. For very small codes there is the TSC MX641P at 600 dpi, and for lighter work the TSC TX200 is a 203 dpi printer with a recorded weight of 8.3 lbs. Our TSC label printers range guide maps the wider lineup.
Upkeep and buying checklist
The MB240T is a new unit in our listing, but the checks before a rollout are the same as for any industrial printer:
- Confirm the interfaces you need, and whether you need wireless, which is an option on this series.
- Confirm the print method if you plan to run direct thermal stock.
- Pick media handling (tear-off, peel, cutter, rewinder) before you order, since these are fitted kits.
- Print your real templates, including the smallest barcode, and scan them at the point of use.
- Plan printhead cleaning and a spare printhead for high volume lines.
If you are buying a single MB240T to replace a failed printer, match the interface and media handling of the old unit first, then copy its darkness, speed and label size settings so the new printer drops into place with minimal testing. If you are buying several for multiple lines or sites, standardize on one configuration, keep one spare unit or printhead per site, and save a known good configuration so a replacement printer can be set up in minutes. Keeping every line on the same model also means one ribbon width, one set of spare parts and one set of operator instructions.
Our thermal printer maintenance guide sets out a cleaning schedule, and printhead failure diagnosis helps you tell a worn head from a dirty one. If you mix new and refurbished printers across sites, refurbished hardware grading explains what each term means.
Need a quote for one MB240T or a full line?
List the part number, quantity and any options such as Wi-Fi, peeler or cutter.
Common questions
What is the difference between the TSC MB240 and the MB240T?
In TSC naming, the T model is the one with the color touch display, which the MB240 series datasheet lists as a 3.5 inch color touch LCD. Both share 203 dpi resolution, 12 ips speed and the same media and ribbon capacity, so the choice is about how operators interact with the printer.
Can the TSC MB240T print direct thermal labels without a ribbon?
TSC lists the MB240 series as thermal transfer and direct thermal, so it can print on direct thermal stock with the ribbon removed. Our listing for 99-068A001-1201 records thermal transfer, so ask us to confirm the configuration if direct thermal printing matters to your order.
Does the TSC MB240T support ZPL?
TSC lists TSPL-EZD as the native language and states it is compatible with EPL, ZPL, ZPL II and DPL. Most standard ZPL formats print as they are, but test your real label templates on one unit before you move a whole line over.
How long a ribbon does the MB240T take?
TSC lists ribbon up to 450 meters long on a 1 inch core, 40 to 110 mm wide. That is longer than a desktop printer ribbon, so operators change ribbons less often on busy shifts.
Is the MB241T the replacement for the MB240T?
TSC presents the MB241 series as its newly introduced compact industrial range and lists 256 MB of SDRAM and 256 MB of flash for the MB241T. TSC does not state on its product page that the MB241 replaces the MB240, so check current availability and plan spares when you standardize.
How heavy is the TSC MB240T?
Our listing records 20.3 lbs, and the TSC datasheet lists the MB240 series at about 9 to 9.2 kg. Plan a solid bench or cart, since it is far heavier than a plastic desktop printer.
Ready to order the TSC MB240T?
Request a quote for one unit or several, and add any other printer part numbers you need.

